- 4 -
LGE Internal Use Only
Copyright ©
LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied all of the 42” 50”, 60” PDP TV with PB41A chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F),
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with
BOM.
(5) The receiver must be operated for about 5 minutes prior to the adjustment.
3. Test method
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
4. Model General Specification
No
Item
Specification
Remark
1
Receiving System
1) DVB-T2 / NTSC-M / PAL-M / PAL-N
2
Available Channel
1) VHF : 2~13
2) UHF : 14~69
3) DTV : 2~69
4) CATV : 1~125
DTV : DVB-T2
3
Input Voltage
1) AC 110 ~ 240V 50/60Hzz
4
Market
Colombia
60 inch Wide(1920 × 1080)
6
Aspect Ratio
16:9
7
Tuning System
FS
8
Module
PDP60R6#### (1920 × 1080)
9
Operating Environment
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
10
Storage Environment
1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %
Summary of Contents for 60PB6500
Page 23: ......