background image

ENGLISH

3

 

Make sure the power cord is connected securely to the monitor and 
wall socket if not secured damage to the Plug and socket may occur 
and in extreme cases a fire may break out.

 

Do not insert metallic or inflammable objects into the product. If a 
foreign object is dropped into the product, unplug the power cord 
and contact the customer service.

 

Do not touch the end of the power cord while it is plugged in. You 
may be electrocuted.

 

If any of the following occur, unplug the product immediately 

and contact your local customer service.

 

-

The product has been damaged.

 

-

If water or another substance enters the product (like an AC 
adapter, power cord, or monitor).

 

-

If you smell smoke or other odors coming from the monitor.

 

-

When lightning storms or when unused for long periods of time.

Even the monitor is turned off by remote control or button, AC power 
source is connected to the unit if not unplugged in.

 

Do not use high voltage electrical equipment near the monitor (e.g., 
a bug zapper). This may result in product malfunction.

 

Do not attempt to modify this product in any way without written 
authorization from LG Electronics. Accidental fire or electric shock 
can occur. Contact your local customer service for service or repair. 
Unauthorized modification could void the user’s authority to operate 
this product.

 

Use only an authorized attachments / accessories approved by 
LG Electronics. Otherwise, this may result in fire, electric shock, 
malfunction, or product damage.

 

Never disassemble the AC adapter or power cord. This may result in 
fire or electric shock.

 

Handle the adapter carefully to avoid dropping or striking it. An 
impact could damage the adapter.

 

To reduce the risk of fire or electrical shock, do not touch the monitor 
with wet hands. If the power cord prongs are wet or covered with 
dust, dry the power plug completely or wipe dust off.

 

Batteries

 

-

Store the accessories (battery, etc.) in a safe location out of the 
reach of children.

 

-

Do not short circuit, disassemble, or allow the batteries to 
overheat. Do not dispose of batteries in a fire. Batteries should not 
be exposed to excessive heat.

 

Moving

 

-

When moving, make sure the product is turned off, unplugged, 
and all cables have been removed. It may take 2 or more people to 
carry larger monitors. Do not press or put stress on the front panel 
of the monitor. Otherwise, this may result in product damage, fire 
hazard or injury.

 

Keep the packing anti-moisture material or vinyl packing out of the 
reach of children.

 

Do not allow an impact shock, any objects to fall into the product, 
and do not drop anything onto the screen.

 

Do not press strongly upon the panel with a hand or a sharp 
object such as a nail, pencil, or pen, or make a scratch on it. It may 
cause damage to screen.

 

Cleaning

 

-

When cleaning, unplug the power cord and wipe gently with a 
soft/dry cloth. Do not spray water or other liquids directly on the 
monitor. Do not clean your monitor with chemicals including glass 
cleaner, any type of air freshener, insecticide, lubricants, wax (car, 
industrial), abrasive, thinner, benzene, alcohol etc., which can 
damage the product and/or its panel. Otherwise, this may result in 
electric shock or product damage.

Summary of Contents for 65UL3E




























Reviews: