background image

ENGLISH

8

Connections

Connect various external devices to the monitor and switch input 
modes to select an external device. For more information of external 
device’s connection, refer to the manual provided with each device.

Other connections

Connect your monitor to external devices. For the best picture and audio 
quality, connect the external device and the monitor with the HDMI 
cable. Some separate cable is not provided.

HDMI

 

Supported HDMI Audio format (Depending on model):
DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz),
DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz),
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

(Only UHD models)

 

   

Picture

   

Additional Settings

   

HDMI ULTRA HD 

Deep Colour

 

-

On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

 

-

Off : Support 4K @ 50/60 Hz 8 bit (4:2:0)

If the device connected to Input Port also supports ULTRA HD Deep 
Colour, your picture may be clearer. However, if the device doesn’t 
support it, it may not work properly. In that case, change the 
monitor’s HDMI ULTRA HD Deep Colour setting to Off.

USB

Some USB Hubs may not work. If a USB device connected through a USB 
Hub is not detected, connect it directly to the USB port on the monitor.

External Devices

Available external devices are: Blu-ray player, HD receivers, DVD players, 
VCRs, audio systems, USB storage devices, PC, gaming devices, and 
other external devices.

 

The external device connection may differ from the model.

 

Connect external devices to the monitor regardless of the order of the 
monitor port.

 

Refer to the external equipment’s manual for operating instructions.

 

If you connect a gaming device to the monitor, use the cable supplied 
with the gaming device.

 

If ULTRA HD content is played on your PC, video or audio may become 
disrupted intermittently depending on your PC’s performance. 
(Depending on model)

 

When connecting via a wired LAN, it is recommended to use a CAT 7 
cable. (Only when 

 port is provided.)

Summary of Contents for 65UL3E




























Reviews: