ENGLISH
10
Power On Default
•
Set to On (Work) or Off (Do Not Work).
•
When ‘Power On Default’ is set to Off, it is not applied to the subordinate Input, A/V Setting, Aspect Ratio menu.
•
When Power On Default is set to On, it can set by entering the subordinate menu.
Input
•
Set whether it is turned on by the set input source or by the last stored input source.
A/V Setting
•
If ‘A/V Setting’ is changed from ‘Off’ to ‘On’, A/V parameters that are set before entering ‘Installation Menu’ are applied whenever turn on power.
Aspect Ratio
•
The aspect ratio determines the default aspect ratio that the set returns to on power up.
Aux Source Setting
•
Set to On (Work) or Off (Do Not Work).
•
The Auxiliary (Input) Source Setting feature will enable or disable for each external input.
•
User cannot disable the current input’s ‘Aux Source Setting’.
Power Management
•
The Power Management feature will turn off the Signage if no input control command is received from either the Local or IR Key within a
selected hours.
-
Activity on either of these inputs shall reset the ‘Power Management’ timer and prevent interruption of Signage viewing.
-
This entry can be set to a value which is corresponding to the desired hours (1 hour to 7 hours).
-
Default value is ‘Off (disabled)’.
Factory Reset
•
Change all settings to their default values.
Summary of Contents for 65UL3E
Page 38: ......
