ENGLISH
17
Clock Setup
Clock Source
•
You can select ‘Off’, ‘NTP’, ‘Admin’.
•
NTP : Clock is synchronized using Network Time Protocol. It's only enabled when network cable is connected.
•
Admin : It's automatically set to Admin when clock is updated by commercial protocols like TVLink-HCEC.
•
Off : Clock is synchronized using any available clock source.
-
Input
(Depending on model)
»
You can select 'Input' according to 'Clock Source'.
»
Input is set to 'None', 'HCAP', 'Protocol', 'HTNG' automatically when Clock Source is 'Admin'.
-
Timezone (City) / Timezone (Custom) / Timezone (Offset)
(Depending on model)
»
In the case when there is difference between the time information received from the Teletext and the time of the current area, it can
be set up to correct this. The initial value is 0, and it can be changed in the range of -12 Hrs ~ +14 Hrs. (Timezone (Offset) range is -12
Hrs ~ +12 Hrs)
Password Change
•
To ensure more security, Password can be changed by installers’ own design.
1
Change password by using virtual keyboard.
2
Input the password again for confirmation.
Lock Mode
•
If ‘Lock Mode’ is ‘Yes’, the following features will be unavailable.
USB
•
If it is set to ‘Enable’, USB devices do not work in relative features. (Exclude S/W update)
Factory Reset
•
If it is set to ‘Enable’, User Menu
General
Reset to Initial Settings
is disabled.
Crestron
(Depending on model)
•
This function enables synchronization with applications provided by Crestron.
•
Server: This menu sets the server’s IP address for the network connection with the server. (equipment provided by Crestron)
•
Port (1024~65535): This menu sets the port for the network connection with the server. The default port number is 41794.
•
IP ID (3-254): This menu sets a unique ID for synchronizing with the application.
Summary of Contents for 65UL3E
Page 38: ......
