LG 75NANO98 Series, Manual

8

ENGLISH

_inde

x

Connections

Connect various external devices to the TV and switch input modes to 
select an external device. For more information of external device’s 
connection, refer to the manual provided with each device.

•

Certain 8K input/decoding standards may not be supported. 
An additional device may be necessary to support certain 8K 
standards. Upscaled and enhanced 8K images will vary depending 
on the source content.

Antenna/Cable

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

•

Use a signal splitter to use more than 2 TVs.

•

If the image quality is poor, install a signal amplifier properly to 
improve the image quality.

•

If the image quality is poor with an antenna connected, try to 
realign the antenna in the correct direction.

•

An antenna cable and converter are not supplied.

•

For a location that is not supported with Ultra HD broadcasting, this 
TV cannot receive Ultra HD broadcasts directly.

Other connections

Connect your TV to external devices. For the best picture and audio 
quality, connect the external device and the TV with the HDMI cable. 
Some separate cable is not provided.

HDMI

•

When connecting the HDMI cable, the product and external devices 
should be turned off and unplugged.

•

Supported HDMI Audio format (Depending on model):
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) 

•

 →   →

 [Picture] 

→

 [Additional Settings] 

→

 [HDMI Ultra 

HD Deep Color]

-

8K: Support 8K @ 50/60 Hz (4:2:0), 8K @ 24/25/30 Hz (4:4:4, 
4:2:2, 4:2:0)

-

4K: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0), 4K @ 100/120 Hz 
(4:4:4, 4:2:2, 4:2:0)

-

Off: Support 4K @ 50/60 Hz (4:2:0)

If the device connected to Input Port also supports Ultra HD Deep 
Color, your picture may be clearer. However, if the device doesn’t 
support it, it may not work properly. In that case, change the TV’s 
[HDMI Ultra HD Deep Color] setting to off.

USB

Some USB Hubs may not work. If a USB device connected using a USB 
Hub is not detected, connect it to the USB port on the TV directly.

IR Blaster

•

Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD 
player, soundbar, game consoles, etc., using the IR Blaster. 
(Depending on country)

-

Connect the IR Blaster cable to the TV’s IR Blaster port. 

-

Place both ends (one or two) of the IR Blaster in front of the 
external device as shown in the picture below.

-

Use universal control settings to control the device. Go to 

→   →

 [Connection] 

→

 [Device Connection Settings] 

→

[Universal Control Settings].

-

Secure the IR Blaster with the 3M tape provided.