LG A12AHB, Owner'S Manual

16

Room Air Conditioner

This operation circulates the air without cooling or heating. It can
be activated by pressing the AIR CIRCULATION BUTTON. Once
the air circulation is activated you can select the air speed by
pressing the INDOOR FAN SPEED SELECTOR BUTTON.

The up/down airflow (Vertical airflow) can be
adjusted by using the remote controller.

1. Press the START/STOP BUTTON to start the

unit.

2. Press CHAOS SWING BUTTON.

3. The louvers will swing up & 

down automatically.

4. To stop the louver at a desired 

angle, press          again

The left/right(Horizontal airflow) can be adjusted
by using the remote control.

1. Press the START/STOP BUTTON to start the

unit.

2. Press the HORIZONTAL AIRFLOW 

DIRECTION BUTTON.

3. The louvers will swing left & 

right automatically.

4. To stop the louvers at a desired 

angle, press         again.

Operating Instructions

Vertical / Horizontal Airflow Direction Control (Optional)

• By pressing the CHAOS SWING BUTTON the horizontal air flow direction is changed automatically based on the chaos

algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable as if
enjoying natural breeze.

• Always use the remote controller to adjust the up and down air flow direction. Manually moving the vertical air flow

direction louver by hand could damage the mechanism.When the unit is shut off, the up/down airflow direction louver will
close the air outlet vent of the system.

NOTE

CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically
changed from high to low or vice versa, depending on the ambient temperature.
• In case of inverter type models where there is no AIR CIRCULATION BUTTON, air circulation can be

operated by pressing the PLASMA BUTTON. 

NOTE

This feature is enabled by factory default setting, but you can
disable it by pressing the ON/OFF button for 6 seconds. The unit
will beep twice and the indicator lamp(2) will blink 4 times. 
To enable it, press the button again for 6 seconds. The unit will
beep twice and the indicator lamp(1) will blink 4 times.

NOTE

Air Circulation Mode

This function is useful in the situation of power failure. 
When power regains after a failure this feature restore the previous operating condition 
and the air conditioner will run in the same settings.

Auto Restart Function