LG A4UH306FA0 Owner'S Manual Download

Page: 20 / 29

Multi Type Air Conditioner

Additional features

AUTO CLEAN

Fan speed is on low.

Fan speed is on medium.

Fan speed is on high.

CHAOS Air

• The Display Luminosity of the unit can be adjusted by using the

Remote Controller.
Press the start/stop button to start the unit. Open the door on the
Remote Controller, press the 2

F button and, press display luminosity

button. Display will be dark. Press the button again to set bright display.

1. Press the Start/Stop button to Start the unit.

2. Open the door on the Remote Controller

Select Cooling Operation or Healthy Dehumidification Operation.

3. Press the Auto clean button.

4. Although the Start/Stop button is pressed, unit operates in Auto clean Mode for 15

minutes - operates in heating operation Mode for 1 minute and circulates the room
air without cooling and heating for 14 minutes. And then unit stops operating.

NOTE:

❏

During Auto Clean function, moistures left in indoor units after Cooling Operation or Healthy
Dehumidification Operation can be removed.

❏

During Auto Clean function, only Start/Stop button, Plasma button and Auto Clean button are available.

Auto Clean (Artcool, Artcool Deluxe, Artcool Mirror Type Only)

Display Luminosity (AMNH076DZ*0[MC07AH*NZ0], AMNH096DU*0[MC09AH*NU0])

Circulates the room air without cooling or heating.

1. Press the Start/Stop button. The unit will respond with beep sound.

2. Open the door on the Remote Controller. Press the Air Circulation button. Now each time that you

press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS and back to low
again.

❏

CHAOS Air

economizes power consumption and prevents overcooling. The fan speed is automatically

changed from high to low or vice versa, depending on the ambient temperature.

NOTICE

Air Circulation Mode

Summary of Contents for A4UH306FA0






























Search results

Summary of Contents for A4UH306FA0

Reviews:

Related manuals for A4UH306FA0

Brands by name

Popular brands

LG A4UH306FA0, Owner'S Manual

Search results

Summary of Contents for A4UH306FA0

Reviews:

Related manuals for A4UH306FA0

Brands by name

Popular brands