31
Control
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Set the chiller address settings from HMI and main controller. If the two (2) addresses do not match, and HMI communication error will occur.
Setting the Address on the Main Controller
1.
3UHVVWKHGRZQDQGULJKWEXWWRQVźŹVLPXOWDQHRXVO\
2. When “FN02” appears, press SW_CONF button.
3.
6HOHFWWKHGHVLUHGDGGUHVVXVLQJWKHOHIWRUULJKWŻŹEXWWRQV:KHQWKHGHVLUHGIXQFWLRQGLVSOD\VSUHVV6:B&21)EXWWRQWRVHW
4. To cancel, press the SW_BACK button.
No.
Description
Screen Display (0 Level)
Screen Display (1 Level)
1
Chiller Address
F
N
0
2
-
-
-
1
CHILLER ADDRESS SETTINGS
If the main controller address does not match the HMI address, an error will occur.
Figure 28: Setting the Address on the Main Controller.
Chiller Address Settings