LG ACP BACnet Installation And User Manual Download

Page: 77 / 220

ENGLISH

Using the Program

Editing Pattern

You can edit a pattern as follows.

In the main menu, click the

[AutoLogic > InterLocking]

menu icon.

Select a pattern and click the

[Edit]

button.

The pattern editing screen opens.

Modify the pattern configuration information and click the

[Apply]

button.

Deleting Pattern

You can delete a pattern as follows.

In the main menu, click the

[AutoLogic > InterLocking]

menu icon.

Select a pattern to be deleted and click the

[Delete]

button.

When you are prompted to confirm the deletion, click

[OK]

The selected pattern is deleted.

Summary of Contents for ACP BACnet





























































































































































































































Search results

Summary of Contents for ACP BACnet

Reviews:

Related manuals for ACP BACnet

Brands by name

Popular brands

LG ACP BACnet, Installation And User Manual

Search results

Summary of Contents for ACP BACnet

Reviews:

Related manuals for ACP BACnet

Brands by name

Popular brands