6
IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
CAUTION
Installation
• Always check for gas (refrigerant) leakage after installation or
repair of product. Low refrigerant levels may cause failure of
product.
• Install the drain hose to ensure that water is drained away
properly. A bad connection may cause water leakage.
• Keep level even when installing the product. To avoid vibration or
water leakage.
• Do not install the product where the noise or hot air from the
outdoor unit could damage the neighborhoods. It may cause a
problem for your neighbors.
• Use two or more people to lift and transport the product. Avoid
personal injury.
• Do not install the product where it will be exposed to sea wind
(salt spray) directly. It may cause corrosion on the product.
Corrosion, particularly on the condenser and evaporator fins,
could cause product malfunction or inefficient operation.
Operation
• Do not expose the skin directly to cool air for long periods of
time. (Don't sit in the draft.) This could harm to your health.
• Do not use the product for special purposes, such as
preserving foods, works of art, etc. It is a consumer air
conditioner, not a precision refrigeration system. There is risk
of damage or loss of property.
• Do not block the inlet or outlet of air flow. It may cause
product failure.
• Use a soft cloth to clean. Do not use harsh detergents,
solvents, etc. There is risk of fire, electric shock, or damage to
the plastic parts of the product.
• Do not touch the metal parts of the product when removing
the air filter. They are very sharp! There is risk of personal
injury.
• Do not step on or put anything on the product. (outdoor units)
There is risk of personal injury and failure of product.
• Always insert the filter securely. Clean the filter every two
!
