29
Operation
2. SPK TYPE (Setting speaker type)
You can set the size of the speakers connected to this
unit.
FRONT LR (FRONT LEFT/RIGHT)
Set the FRONT L/R speaker to LARGE or SMALL.
•
LARGE : If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”.
When the LFE OUT is set to “FRONT”,
front speakers are automatically set to
“LARGE”.
•
SMALL : If the sound is distorted, or you fell a
lack of surround effects when using multi
channel surround sound, select “SMALL”
to activate the bass redirection circuitry
and output the front channel bass
frequencies from subwoofer.
When the LFE OUT is set to “SUBWF”,
front speakers are automatically set to
“SMALL”.
CENTER
Set the CENTER speaker to LARGE, SMALL, or
NONE.
•
LARGE : If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”.
•
SMALL : If the sound is distorted, or you fell a
lack of surround effects when using multi
channel surround sound, select “SMALL”
to activate the bass redirection circuitry
and output the center channel bass
frequencies from front speaker or
subwoofer.
•
NONE : If you did not connect a center speaker,
select “NONE”. The sound of the center
channel will be outputted from the front
speakers.
SURR. LR (SURROUND LEFT/RIGHT)
Set the SURROUND L/R speaker to LARGE, SMALL,
or NONE.
•
LARGE : If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”.
•
SMALL : If the sound is distorted, or you fell a
lack of surround effects when using multi
channel surround sound, select “SMALL”
to activate the bass redirection circuitry
and output the surround channel bass
frequencies from subwoofer or other
“LARGE” speaker.
•
NONE : If you did not connect surround speaker,
select “NONE”.
LFE OUT
Set the output of subwoofer to FRONT, SUBWF, or
BOTH.
•
FRONT : Select “FRONT” if you did not connect a
subwoofer. The LFE signals, the low-
frequency signals of front left and right
channels, and the low-frequency signals
of other speakers set to “SMALL” or to
“NONE” are all directed to the front left
and right speakers.
•
SUBWF : Select “SUBWF” if you connected a
subwoofer. The LFE signals as well as
the low-frequency signals of other
speakers set to “SMALL” or to
“NONE” are directed to the subwoofer.
•
BOTH :
Select “BOTH” if you connected a
subwoofer. The low-frequency signals of
any source are output from the
subwoofer. The LFE signals as well as
the low-frequency signals of other
speakers set to “SMALL” or to
“NONE” are directed to the subwoofer.
The low-frequency signals of the front
left and right channels are directed to
the front left and right speakers.
(When the analog or digital 2ch input is
used, the front speakers is only
outputted.)
3. X-OVER
The bass frequency you select is added to the output
of subwoofer or outputted to the front speakers.
X - OVER
Set the bass frequency to 40Hz - 200Hz.
The default setting is 100Hz.
)
2 . SPK TYPE
FRONT LR : SMALL / LARGE
CENTER : SMALL / LARGE / NONE
SURR. LR : SMALL / LARGE / NONE
LFE OUT : FRONT / SUBWF / BOTH
3 . X - OVER
X - OVER : 040Hz ~ 200Hz
Summary of Contents for AR502PS
Page 40: ...P NO MFL39518818 ...
