LG ARNU07GB1G1 Service Manual Download

Page: 175 / 338

- 175 -

LGE Internal Use Only

Functions

Parts Name

Inverter compressor

Constant velocity compressor

Inverter fan motor

Outdoor EEV

Excessive cold EEV

Liquid injection

Valve(Inv.)

Liquid injection

Valve(Con.)

Hot gas bypass

valve

Square Junction valve

Outdoor check valve

Inverter high pressure S/W

Constant velocity high pressure S/W

High pressure sensor

Low pressure sensor

Heat exchanger temperature sensor

Inverter discharger temperature sensor

Constant velocity discharger temperature sensor

Air temperature sensor

Suction temperature sensor

Liquid tube temperature sensor

Excessive cold outlet temperature sensor

Excessive cold inlet temperature sensor

Discharge check valve

Symbol

INV.

CON.

IMT

OEEV

SEEV

LINV

LCON

HGV

4 WAY

OCHK

HSINV

HSCON

HPS

LPS

THEX

TINV

TCON

TAIR

TSUC

TLIQ

TSOUT

TSIN

Check solenoid Valve

CSOL

DCHK

Major Function

Operated up to 30Hz~100Hz by inverter operation. Pressurize high

temperature, low pressure refrigerant to high temperature, high

pressure.

Operated cold/heat load with assembly with inverter compressor.

Adjust outdoor wind quantity while varying the outdoor fan by 0~60Hz.

Adjust flow quantity depending on overheat level of refrigerant in the

outdoor side in heat status.

Adjust flow quantity depending on overheat level of the outlet of the

excessive cold heat exchanger in cold status.

Prevent overheat of the compressor by supplying liquid refrigerant

after opening the valve when discharge temperature of the compressor

rises.

Stabilize the system by high pressure gas to the low pressure part
after opening when bypass and low pressure of refrigerant rapidly

reduces to less than the valve valve.

Cut-off the outdoor heat exchanger with the evaporator or condenser

depending on operation of the indoor unit.

Used to obtain flow quantity of refrigerant in cold condition.

Mechanically stop the compressor where the compressor rises to the

high pressure limit valve due to abnormal operation.

Measure high pressure of the system.

Measure low pressure of the system.

Used for control by measuring temperature of the outdoor heat

exchanger.

Used for protecting and controlling the compressor by measuring

discharger temperature.

Measure outdoor temperature.

Stabilize the system by high pressure gas to the low pressure part

after opening when bypass and low pressure of refrigerant rapidly

reduces to less than the valve.

Used for controlling excessive heat level by measuring refrigerant

temperature of the suction pipe.

Used for controlling excessive cold level by measuring refrigerant

temperature of the liquid pipe.

Used for controlling excessive heat level by measuring outlet

temperature of the excessive cold circuit.

Used for controlling excessive heat level by measuring outlet

temperature of the excessive cold circuit.

Prevent reverse flow of high pressure refrigerant into the compressor.

2. Functions

2.1 8HP/10HP/12HP/14HP Parts Function

Summary of Contents for ARNU07GB1G1






































































































































































































































































































































Search results

Summary of Contents for ARNU07GB1G1

Reviews:

Related manuals for ARNU07GB1G1

Brands by name

Popular brands

LG ARNU07GB1G1, Service Manual

Search results

Summary of Contents for ARNU07GB1G1

Reviews:

Related manuals for ARNU07GB1G1

Brands by name

Popular brands