LG AS70GPWF1, Owner'S Manual

HOW TO USE

13

ENGLISH

• Explanation on the display : Since PM1.0 density is Bad(Orange) with 80

μg/m

3

, display dust at

the odor/dust display. Since ‘odor’ is displayed at the odor/dust display, odor density is also
strong. Since PM1.0 is displayed at the dust particle size display, the density level of PM1.0 is
higher than that of PM10 or PM2.5

Odor Dust

1.0

PM

Overall cleanliness color display

Odor/dust display

Dust density display

Dust particle size

Reference

• PM10 and PM2.5 cleanliness follows the provided by the MEP. (2015)

- The overall cleanliness level displayed on the product may be different from a level announced by

MEP.

• The dust density level for PM1.0 has been displayed in the same manner as the dust density level for

PM2.5. (LG Electronics standards)

• The displayed density of PM10 / PM2.5 could differ from the forecast of the MEP and from other meas-

urement devices or products.

- Indicated dust concentration values can differ from each other depending on the differences in dust

measuring methods and also from real dust concentration levels.

- The assessment of dust density was made against dust used for LG Electronics standards tests.

• In case you use the product which generates steam and micro particles (humidifier, cooling device,

spray, etc.), micro dust density could change.

• Since the cleanliness display shows overall dust and odor, it could differ from the density value of

PM10, PM2.5, and PM1.0.

• Even in the same space, the PM10 density value could differ from other products due to air circulation.

• The overall cleanliness display could change in response to the chemicals contained in air freshener,

perfume, deodorizer, and cosmetics.

• The displayed dust density value could change depending on the installation environment (affected by

sofa, bed, carpet, vacuum cleaner, humidity, smoke, bugs, fats, etc.)

• The displayed density value of PM10/PM2.5/PM1.0 could change depending on the surrounding envi-

ronment (construction site, road side, plant, etc.)

• The density of micro dust could be measured high near exit doors, windows, and ventilation holes or

under the environment where outside air flows in.

•  Do not clean the sensor with other materials other than alcohole or water. It may cause product failure.

※

MEP : Ministry of Environmental Protection the People's Republic of China

1.MFL42657821,영어  2016. 4. 20.  오후 6:31  페이지 13