background image

30

T

a

pe Copying

Specifications

The design and

specifications are
subject to change

without notice.

 ENTREE
ANTENNE

  SORTIE
ANTENNE

EURO AV1

AUDIO/
VIDEO

 AERIAL

 RF.OUT

L

 

AUDIO

 

OUT

A second VCR (for tape copying) should

be connected to the SCART socket on

the back of your VCR. Remember to

select the appropriate audio/video
mode by pressing the 

AV

button on the

remote control.

SCART Lead

If you use a SCART lead,
picture and sound quality
of video-tape playback will
be improved.

All connections must be
made with both your VCR's
and TV unplugged from the
mains

Back view of your VCR

Place the blank video tape
that you wish to record 

ON

into this VCR

Back view of playing VCR

Place the video tape that you wish to record

FROM

into this VCR

Unauthorised recording of copyrighted TV programmes, film, video
cassettes and other materials may infringe the rights of copyright
owners and be contrary to copyright laws

General

Power 110-240V~, 

50/60Hz.

Power consumption 

Approx. 16 Watts (Energy saving 
mode: 3 Watts)

Video Head System 

Double azimuth 4 heads, helical 
scanning. (BC493Y/BC450Y/BD470Y)
Rotary 2 heads, helical scanning
(BC270Y/BC250Y)

Tape speed 

23.39 mm/sec (SP mode)/
11.69 mm/sec (LP mode).

Tape format 

Tape width 12.7 mm (0.5 inch).

Maximum recording 

4 hours (SP mode, E-240 tape)/

time

8 hours (LP mode, E-240 tape).

Rewind time

Approx. 180 sec.(E-180 tape)
(BD470Y/BD270Y).
Approx. 65(±10) sec. (E-180 tape)
(BC493Y/BC450Y/BC250Y)

Dimensions

360 x 94 x 270 mm (W x H x D) 

Weight 3.4 

Kg.

Operating temperature 5

o

C - 35

o

Operating humidity 

Less than 80%.

Timer  

24 hours display type.

Video

Television system 

CCIR standard (625 lines, 50 fields)
PAL/SECAM colour signal

Recording format 

PAL/MESECAM

RF reception

PAL/SECAM (B/G, D/K)

RF OUT

PAL K/G

Input level 

VIDEO IN (SCART type)
1.0 Vp-p, 75 Ohm, unbalanced

Output level 

VIDEO OUT (SCART type)
1.0 Vp-p, 75 Ohm, unbalanced

Signal to noise ratio 

More than 43 dBm.

RF Modulator

UHF channels 22-68 (Adjustable)

Audio

Input level 

AUDIO IN (SCART type)
-6.0 dBm, more than 10 kohms

Output level 

AUDIO OUT (SCART type)
-6.0 dBm, less than 1 kohm

Track Mono 

track

Frequency response

100 Hz-10 kHz (-6/+3 dBm)

Signal to noise ratio

More than 43 dB 

Summary of Contents for BC250Y

































Reviews: