Appendix
72
Appendix
6
Audio Output Specifications
Jack/Setting
Source
HDMI OUT
PCM Stereo
PCM Multi-Ch
DTS Re-encode
*
3
Bit Stream
*
1
*
2
Dolby Digital
PCM 2ch
PCM 5.1ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
PCM 5.1ch
DTS
Dolby Digital Plus
Dolby TrueHD
PCM 2ch
PCM 5.1ch
DTS
Dolby TrueHD
DTS
PCM 2ch
PCM 5.1ch
DTS
DTS
DTS-HD
PCM 2ch
PCM 5.1ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
PCM 2ch
DTS
Linear PCM 2ch
Linear PCM 5.1ch
PCM 2ch
PCM 5.1ch
DTS
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
PCM 5.1ch
DTS
Linear PCM 7.1ch
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [Bit Stream]. (Except
LPCM Codec : the output always include
interactive and secondary audio.)
*2 This player automatically selects the HDMI audio
according to the decoding capability of the
connected HDMI device even though [Digital
Output] option is set to [Bit Stream].
*3 If the [Digital Output] option is set to [DTS re-
encode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like [Bit
Stream]).
y
The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio
CD while playback.
y
With digital audio connection (HDMI OUT), Disc
Menu button sounds of BD-ROM may not be
heard if the [Digital Output] option is set to [Bit
Stream].
y
If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
y
Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver
is equipped with a Digital Multi-channel decoder.
y
This setting is not available on the input signal
from an external device.