23
Press the numbered
buttons to enter the date
of the programme.
If you press OK before
entering the date you may
select one of the
following automated
recording features. Press
F
or
G
to select, then press
OK to confirm.
Dly(Daily) To record every
day (except Saturday and
Sunday) at the same time.
Weekly To record at the
same time every week.
Press the numbered
buttons to enter the
recording start and end
times of the programme
that you wish to
record.
Please note your VCR uses
a 24 hour clock. e.g. 1 pm
will be displayed as 13:00.
You may also select the
start and end times by
pressing
▲
or
▼
.
Press
G
to select the
recording speed.
Press
▲
or
▼
if you wish
to record in Long Play or
Standard Play.
Check that the timer
event details are correct.
Press
i
to save your
settings.
If PLEASE CHECK is
displayed, you have entered
incorrect information and will
need to re-enter the data.
If you want to make other
Timer recordings repeat
stages 3 - 8. Press
i
again to remove the
menus. Press POWER to
switch your VCR off.
TIMER indicator will light
in the video recorder’s
display while your VCR
waits to make the recording.
If at a later date you wish to delete or change any of the settings in timer event memory you may
do so without having to enter all the timer event information again. Simply display the timer
event screen. Press
D
or
E
to select the event that you wish to delete or change.
Press
F
to delete the event.
Press OK to change; then press
F
or
G
to select Station, Date, Start and End times and LP.
Press
D
or
E
to enter the correct information.
ENR/
DEP
1
2
3
4
5
6
7
8
9
TV/VCR
0
CM SKIP
PR
DATE
T I M E
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
BBC1
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
SP
i
OK
DLY
SU MO TU WE TH FR SA
26
ENR/
DEP
1
2
3
4
5
6
7
8
9
TV/VCR
0
CM SKIP
PR
DATE
T I M E
- -
- -
26
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
BBC1
- - - - - - - -
~
:
:
10 00 11
00
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
SP
i
POWER
EJECT
If timer record
events overlap...
Make sure that the
preset times of the
timer recording events do
not overlap. If they do,
the earlier programme
will always be given
priority.
Example:
Programme 1 is
programmed to start at
10:30 and end at 11:30.
Programme 2 is
programmed to start at
11:00 and end at 12:00.
(In this case, Programme
1 will be recorded in its
entirety, but only the last
30 minutes of
Programme 2 will be
recorded.)
10:30
11:00
11:30
12:00
PROGRAMME 1
PROGRAMME 2
(This portion will not be
recorded.)
CLK/CNT
CLEAR
OK
i
PAUSE/
