background image

LG

Guarantee

LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.

1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12

months from the original date of purchase.

2.  The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair

of this LG equipment, for a period of 12 months from the original date of purchase. These claims must be made
in accordance with the published scale of service charges and relevant claims procedure.

PLEASE NOTE:
A.  The dealer may restrict the guarantee to the original purchaser.
B.  The dealer is not obliged to carry out service under guarantee if unauthorised modifications are made to the

apparatus, or if non standard components are used or if the serial number of the apparatus is removed,
defaced, misused, or altered.

C.  Any claims made under guarantee must be directed to the dealer from whom the equipment was originally

purchased. The dealer may, before carrying out service under guarantee, require a receipted account as evi-
dence of the date of purchase.

D.  We respectfully point out that your dealer is not obligated to replace batteries if they become exhausted or

worn in use.

E.  Aerial alignment and consumer control adjustments are not covered by this guarantee.

This guarantee does not affect your statutory rights.

REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:

RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE SUR
RENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.

Product Registration Card : It is helpful to complete at least your name, address, phone, model & serial

numbers and return it. This will enable LG to assist you in the future should you
lose your receipt, your units be stolen, or should modifications be necessary.

To obtain information or assistance:

Call 01753 500470 Monday-Friday 9.00am-4.30pm

Please complete for your own record

In all cases of difficulty - consult your LG dealer 

from whom the product was purchased

MODEL NO.*

SERIAL NO.*

DATE OF PURCHASE.*

P/N: 3834RP0056C

Summary of Contents for BN200IB
































Reviews: