Installation/Owner Manual
55
ENGLISH
Detailed Explanation of Object
14) Set Room Temperature
Point number: 13
Object name: SetRoomTemp_XXX (XXX: A/C group number)
Object type: Analog Value
Meaning: This object is used to set the room temperature for the air conditioner.
Present_Value property:
Temperature(°C)
Remarks:
1. This unit is for indoor units only, and the approximate set temperature range is 18 ~ 35°C.
2. When COV registration is made, the COV will be reported the moment a temperature change of
at least
1°C is detected.
15) Room Temperature
Point number: 14
Object name: RoomTemp_XXX (XXX: A/C group number)
Object type: Analog Input
Meaning: This object is used to monitor room temperature which the indoor unit is placed.
Present_Value property:
Temperature(°C)
Remarks
: This object is for indoor units only, and reports the room temperature data measured by
the indoor units.
16) Alarm
Point number: 15
Object name: Alarm_XXX (XXX: A/C group number)
Object type: Binary Input
Meaning: This object is used to monitor the Alarm.
Present_Value property:
ACTIVE: Abnormal
INACTIVE: Normal
17) Error Code
Point number: 16
Object name: MalfunctionCode_XXX (XXX: A/C group number)
Object type: Multi-state Input
Meaning: This object is used to monitor the details of the error status when the air conditioner has
an error.
Present_Value property:
Error code(Range is 0 to 255 )
Remarks
: This object's error code descriptions should be referred to the corresponding table at
the "Reference LG original Error Code".
Summary of Contents for BNU-BAC
Page 401: ...CHINESE LG BNU BAC BACnet閘道器 安裝 使用指南 LG 重要須知 安裝與操作室內空調設備前 請先詳閱本安裝指南 閱讀完畢後 請將本指南妥善保存以備日後參考之用 ...
Page 431: ...安裝 使用指南 31 CHINESE 測試作業程序 檢視監督資訊的功能 點擊顯示幕上的圖示 如下所示 會出現遠端診斷頁面 以便您檢視室內空調 通風設備的運作資訊 ...
Page 432: ...32 BACnet閘道器 測試作業程序 檢視控制功能 室內空調 點擊遠端診斷頁面的 監督 室內空調 通風設備 按鍵 您就可以即時檢視到室內空調 通風設備的 資訊 ...
