Drive Direction
Select the direction in which you want to move the motor.
Drive Mode
Two modes are available : Step and Continuous.
Test Transponder
Select the test Transponder you want to tune.
Set Limit
Set the motor movement to east or west to have the motor move only within the
direction set.
Go to 0
You can move the motor to Zero.
USALS
: Set your current location (Longitude/Latitude).
To Use Manual Programme Tuning
General
Programmes
Programme Tuning
(
Programme Tuning &
Settings
)
Manual Tuning
This function is for manually searching and saving programmes.
For digital broadcasting, signal strength and signal quality can be checked.
Programme List Update
General
Programmes
Programme Tuning & Settings
Programme
List Update
It updates the changed Programme List information by based on country broadcasting
circumstance and satellite.
Step : The motor moves based on the value you enter (from 1 to 128).
●
Continuous
: The motor moves continuously until you press the Stop.
●
On : You can limit the movement to the current direction by selecting the West/East.
●
Off : You can cancel the limit you set.
●
107
