DirectCD
TM
v2.5b(s)
14
Running
the Install
Program
(MS-DOS
Installation)
For
Windows
95/98/2000
Users
For
Windows
NT
Workstation
Ver.4.0 Users
1. Insert the diskette into the appropriate drive.
2. Go to the floppy drive by typing A: or B: at the DOS prompt, as
appropriate.
3. Type the word INSTALL and press [ENTER].
4. The INSTALL program will begin loading. When loading is com-
plete, the INSTALL program identification will appear on screen.
5. Follow the instructions on screen.
6. When installation is complete, remove the diskette and reboot
your PC.
■
In order to ensure normal drive operation, please check the fol-
lowing:
• The drive is displayed in
Windows 95/98 : [Control Panels]-[System]-[Device Manager]-[CD-ROM]
Windows 2000 : [Control Panels]-[System]-[Hardware]-[Device
Manager]-[DVD/CD-ROM-Drive]
• 32-bit is displayed in
[Control Panels]-[System]-[Performance]
■
If the drive is not recognized by your computer, please check the
following items.
• If a indicator is displayed on the IDE controller in [Control
Panels]-[System]-[Devices Manager]-[Hard Disk Controller],
you will need to contact your PC’s manufacturer or the moth-
erboard’s manufacturer and get the appropriate IDE controller
driver.
■
Run Add New Hardware in Control Panel to let PC search
again for new device.
■
In order to ensure normal drive operation, please check to see if
the drive is displayed on the IDE controller in [Control Panels]-
[SCSI Adapter]-[Devices]
■
If the drive is not recognized by your computer, a indicator is
displayed on the IDE controller in [Control Panels]-[SCSI
Adapter]-[Devices], you will need to contact your PC’s manufac-
turer or the motherboard’s manufacturer and get the appropriate
IDE controller driver.
