background image

37

ENGLISH

Troubleshooting

Symptoms

Causes and Solutions

I cannot turn on 

the Projector.

• 

Please make sure your projector power plug is correctly 

connected to the outlet.

• 

There may be a problem with the outlet, so try plugging 

the power cord of another product into the outlet 

where the projector was plugged in.

Cannot control 

the Projector 

with the remote 

control.

• 

The remote control may not work properly where a 

lamp with electronic stabilizer or a three-wavelength 

lamp is installed.

 

— In this case, replace the lamp with electronic 

stabilizer or the three-wavelength lamp with 

international standard products to ensure the 

remote control works properly.

• 

Check if there is any obstacle between the product and 

the remote control.

• 

When replacing the batteries, make sure that they are 

properly installed according to the polarities (+, -).

• 

Replace both used batteries with new ones.

The power turns 

off suddenly.

• 

Check whether the [Sleep Timer], [Auto Off], or [Auto 

Power Off] is set.

• 

See if the external devices are operating together.

• 

The auto-off function may have been activated. This 

product is equipped with an auto-off function that 

automatically turns the product off when no signal 

is present or when the remote control has not been 

pressed, depending on the settings for the auto-off 

function.

Summary of Contents for CineBeam PF610P













































































































































Reviews: