91
OPTION 2 Settings
1
Press the
SETTINGS
button.
2
Use the
, , , or
button to select
OPTION 2
and press the
OK
button.
3
Use the
, , , or
button to set up the desired item and press
the
OK
button.
-
To return to the previous menu, press the button.
4
Press the
EXIT
button when completed.
The settings for option 2 are described as follows.
Menu
Description
Keystone
To prevent the screen image from becoming trapezoidal,
Keystone adjusts the top and bottom width of the image if
the projector is not set at a right angle to the screen.
Auto
Keystone
Auto Keystone
provides a rectangular screen image by
automatically adjusting the Keystone number when there
is a trapezoidal screen image caused by tilting of the
projector.
Item
On
Automatically adjusts the Keystone number.
Off
Manually adjusts the Keystone number.
PJT Mode
This function turns the projected image upside down or
flips horizontal.
•
Select
Rear
when projecting from the back of the
transparent screen purchased separately.
•
Select
Front Ceiling
when installing the product on the
ceiling.
•
When the
PJT Mode
is
Rear Ceiling/Front Ceiling
,
the left/right of the speaker changes automatically.
High
Altitude
If the projector is used at an altitude higher than 1200
meters, turn this on.
Otherwise, the projector may overheat or its protection
function may be activated. If this happens, turn the
projector off and then on again after waiting for several
minutes.
