Operating
36
Oper
ating
3
Sleep Timer Setting
Press
SLEEP
on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After the delay time, the unit will be turned off.
To cancel the sleep function, press
SLEEP
on the
remote control repeatedly until “SLEEP 10” appears,
and then press
SLEEP
on the remote control once
again while “SLEEP 10” is displayed.
y
You can check the remaining time before the
unit is turned off. Press
SLEEP
on the remote
control to check or change the remaining
time.
y
You can edit the remain time when displays
the remaining time or “DIMMER”.
,
Note
Dimmer
Press
SLEEP
on the remote control once.
The display window will be darkened by half.
To cancel it, press
SLEEP
on the remote control
repeatedly until dim off.
All the lighting turns off when dimmer is being
operated.
,
Note
Auto power down
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 15 minutes.
The unit will also turn itself off after six hours if the
main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only
MASTER unit in case of WIRELESS PARTY LINK
connection. In case of SLAVE unit, Auto power down
is available after disconnection SLAVE unit and
MASTER unit.
Summary of Contents for CJ88
Page 46: ......
