Operating
27
Oper
ating
3
Radio Operations
Be sure that both FM aerials are connected.
Listening to the radio
1. Press
F
until FM appears in the display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold
TUNING-/+
on the remote
control or
Y
/
U
on the unit for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Manual tuning :
Press
TUNING-/+
on the remote control or
Y
/
U
on the unit repeatedly.
3. Adjust the volume by pressing
VOL +/-
on the
remote control or rotating volume knob on the
unit repeatedly.
Improving poor FM reception
Press
N
on the remote control or
T
on the unit.
This will change the tuner from stereo to mono and
usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press
F
until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING -/+
on the remote control or
Y
/
U
on the unit.
3. Press
JUKEBOX/MEMORY
on the remote
control. A preset number will blink in the display
window.
4. Press
PRESET·FOLDER
W
/
S
on the remote
control to select the preset number you want.
5. Press
JUKEBOX/MEMORY
on the remote
control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET·FOLDER
W
/
S
or
0
to
9
numerical
buttons on the remote control.
Deleting all the saved stations
1. Press and hold
JUKEBOX/MEMORY
on the
remote control for two seconds.
“ERASEALL” will flash up on the unit display.
2. Press
JUKEBOX/MEMORY
on the remote
control to erase all the saved radio stations.
Summary of Contents for CJ88
Page 46: ......
