Operating
16
Oper
ating
3
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about
the radio station being listened to. Press
RDS
repeatedly to cycle through the various data types:
PS
(Programme Service Name)
The name of the channel will appear in
the display.
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT
(Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time and date as
broadcast by the station.
You can search the radio stations by programme
type by pressing
RDS
. The display will show the last
PTY in use. Press
PTY/ASPM
one or more times to
select your preferred programme type. Press and
hold
TUN. -/+
The tuner will search automatically.
When a station is found, the search will stop.
Using the Auto Station
Programme Memory(ASPM)
This function lets you automatically search and
store 50 stations.
1. Press
FUNCTION
on the remote control or
FUNC.
on the unit until FM appears in the display window.
2. Press and hold
PTY/ASPM
for at least 3 seconds.
After "ASPM" will blink in the display window,
scanning will start. (87.50 - 108.00 MHz)
To stop scanning, press
PTY/ASPM
again.
3. When an RDS station is found, the station will be
stored in memory.
4. After scanning, the number of stations stored
in memory will be displayed, and then“END” will
appear.
5. Although you preset stations for FM manually,
a preset number for a RDS station will be saved
successively.
6. To listen a stored station, press
PRESET/FOLDER
W
/
S
.
Deleting all saved RDS
stations
1. Press and hold
PROGRAM/MEMO
for two
seconds. “ERASE” will blink in the display
window.
2. Press
PROGRAM/MEMO
to erase all saved radio
stations.
y
If the
same station is broadcast on different
frequencies, the strongest frequency will be
stored in memory.
y
If 50 stations have already been stored in
memory, the scan will be aborted.
y
If no station have been stored in memory,
“0 MEM”and “END” will appear for about 4
seconds.
y
If the RDS signals are very weak, station
may not be stored in memory.
y
If 50 stations is already stored, ASPM will not
work. So delete all these stations to search
and store new RDS stations in memory.
,
Note
CM1530-BT_ADEULLK_ENG_6525.indd 16
2014-01-13 2:03:37
