Operating
24
Oper
ating
3
Dubbing USB to USB
You can do dubbing a various sound source in
USB1 to USB2 on USB function.
1. Connect a USB device including desired sound
files to USB1.
2. Connect an USB device to USB2.
3. Press
REC. TO USB 2
on the unit or
USB REC
on
the remote control.
4. To stop recording, press
I
on the unit or
Z
ENTER
on the remote control.
Pausing recording
During recording, press
REC. TO USB2
on the
unit or
USB REC
on the remote control to pause
recording. Press it again to restart recording. (Only
Radio/AUX/Portable)
y
You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/WMA,
CD Only)
y
During recording MP3/WMA, there is no
sound.
y
When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
y
Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete file may be made and not
deleted on PC.
y
If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
y
Multi card reader device or External HDD
can not be used for USB recording.
y
A file is recorded by about 512 Mbyte when
you record for a long term.
y
You may not store more than 999 files.
y
It’ll be stored as follows.
AUDIO CD
MP3/WMA
The other
source*
* : TUNER, AUX, Poratable and the like.
,
Note
The making of unauthorized copies of copy-
protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
CM6520-AP_DKENHLK_ENG.indd 24
2012-05-02 3:55:25
