LG CRD-8484B, Owner'S Manual

E-8

4. Adjust the Master/Slave jumpers on the back of the CD-ROM drive as 

necessary.
Connect the CD-ROM drive to the IDE ports of your motherboard. In general, 
the hard drive will be in Primary IDE port and Master device for booting the 
operating system. There are two possible alternate connection for CD-ROM 
drive installation.

A) When using a Primary IDE port

If you need to connect your CD-ROM drive to the same Primary IDE port, the 
CD-ROM drive should be set to Slave position.

5. When the installation of the drive unit is complete, replace the computer 

cover.

6. Reconnect the computer power cord and turn on the computer.

B) When using a Secondary IDE port

You can also connect CD-ROM drive to the Secondary IDE port and set to 
Master position.

DIGITAL

AUDIO

D G

G

L

C S M

39

1
2

40

R

+5

+12

GND

AUDIO

ANALOG

INTERFACE

POWER

DIGITAL

AUDIO

D G

G

L

C S M

39

1
2

40

R

+5

+12

GND

AUDIO

ANALOG

INTERFACE

POWER

DIGITAL

AUDIO

D G

G

L

C S M

39

1
2

40

R

+5

+12

GND

AUDIO

ANALOG

INTERF

ACE

POWER

Primary connector

Master drive
(Booting hard disk)

Slave drive
(CD-ROM drive)

Master drive
(Booting hard disk)

Master drive
(CD-ROM drive)

Motherboard

Secondary connector

Primary connector

Slave drive
(Other IDE drive)