8
Picture control
Enjoying the Eye Function
(some models)
The set will automatically adjust the picture
according to the surrounding conditions with the
display
Magic eye
.
1. Press the
EYE/
button on the remote control.
The display
Magic eye
appears and the
picture is adjusted.
2. Press the
EYE/
button again to switch the
Eye function off.
Auto Picture Control
You can select picture modes programmed at
factory as you prefer.
Using the APC button
1. Press the
APC
button.
2. Press the
APC
button to select
Magic eye
(some
models),
Clear
,
Optimum
,
Soft
or
User
.
3. Press the
ENTER(
A
)
button to exit.
Adjusting the Picture
This is the function to manually adjust the desired
picture levels
(
Contrast
,
Brightness
,
Color
,
Sharpness
,
Tint
)
of the screen as you like. If the
picture you set is not satisfactory, you can select a
factory preset picture. In the broadcasting system
PAL-M/N, the picture item
Tint
is not displayed.
XD (some models)
XD is LG Electronic’s unique picture improving
technology to display a real HD source through an
advanced digital signal processing algorithm.
Note: When selecting APC options, XD is
automatically change to Off.
Sound control
Enjoying the Stereo/SAP
Broadcast(some models)
This TV set can receive MTS stereo programs and
any SAP (Secondary Audio Program) that
accompanies the stereo program, as the system to
be transmitted one additional sound signal as well
as the original one. MTS function doesn't operate in
the video mode.
Using the MTS Button
1. Press the
MTS
button to select your desired
MTS mode.
Each time you press this button, the
MONO
,
STEREO
or
SAP
mode appears in turn.
2. Press the
ENTER (
A
)
button to exit.
Notes:
• Stereo or SAP can only be received if the TV
station transmits those signals, even though you
have selected
STEREO
or
SAP
.
• Mono sound is automatically received if the
broadcast is only in Mono; even though
STEREO
or
SAP
has been selected.
• Select
MONO
if you want to listen to mono
sound in remote fringe areas during stereo/SAP
broadcasting.
Auto Sound Control
You can enjoy the best sound without any special
adjustment because this TV set automatically
adjusts the sound appropriate to viewing program
character by self-intelligence.
1. Press the
MENU
button and then use the
D
/
E
button to select the Sound menu.
2. Press the
G
and then use the
D
/
E
button to
select
DASP
.
3. Press the
G
and then use the
D
/
E
button to
select
Flat, Music, Movie, Sports
or
User
.
4. Repeatedly press the
MENU
button to exit.
Turbo Sound (some models)
With this function sound will be more
emphasized and amplified than normal sound.
You can enjoy the Turbo sound so much better
than normal sound.
X-wave (Wireless Sound) (some models)
You can also listen to the sound through the FM receiver.
1. Press the
MENU
button and then use the
D
/
E
button the until the menu is displayed as shown
right.
2. Press the
G
and then use the
D
/
E
button to
select
X-WAVE
.
3. Press the
G
and then use the
D
/
E
button to
select
Set Freq.
.
4. Press the
G
button to tune in a frequency on the
X-wave menu.
5. Use the number
0
to
9
or press the
F
/
G
button
to match the TV’s frequency and the FM
receiver’s.
Note
:
1. If the reception is poor or weak, select a
different frequency.
2. For best results, there should be no more that
5m(16.4ft) between the TV and FM Receiver.
3. In certain areas, the FM transmitter ability may
be weak, such as near a broadcast tower.
4. The reception sensitivity may depend on the
kinds of receiver (FM radio).
AVL (Auto Volume Leveler)
AVL automatically keeps on an equal volume level
even if you change channels.
Adjusting the treble (some models)
This function is to increase or decrease treble.
Adjusting the bass (some models)
This function is to increase or decrease bass.
