14
FUNCTION OF CONTROL BUTTON
①
Process Indicator
•
Indicates current program phase.
•
The
Wash
,
Rinse
and
Dry
lamps twinkle while each phase of washing process.
•
The
Clean
lamp turns on after all procedure is ended for 4minutes.
②
Salt & Rinse Refill Indicator
•
Salt
: Refill with special salt when the lamp turns on.
•
Rinse
: Refill with rinse aid when the lamp turns on.
③
Half Load
•
In case of small load, use upper or lower rack only to save energy.
•
With each press, can select
Upper
or
Lower
rack only.
•
In case you don’t select this button, the machine always works vario washing, which operate upper and lower spray
arm alternately.
•
In case you select the
Dual Spray
, the level of water jet is changed to soft or strong in a sequence.
(The level of water jet is strong when the lamp turns on.)
④
Extra Hot & Child Lock Indicator
• Lamp will turn on when the Extra Hot setting is on.
• Lamp will turn on when the Child Lock setting is on.
⑤
Time Left
•
Before starting, the display window shows the running time of the selected program.
•
After starting, the display window shows the remaining time.
• If the dishwasher has a trouble, the trouble type is displayed. (OE, IE, EI, FE, HE, tE, LE)
•
If these error letters are displayed, please refer to the trouble shooting guide page 29 and follow the guide.
⑥
Delay Start
•
If you want to delay the start of selected program, press this button.
•
Pressing this button will increase time by 1 hour.
•
The delay start time can be adjusted from 1 hour to 19 hours.
⑦
Program
•
Press the cycle that corresponds to your desired wash cycle.
⑧
Extra Hot
•
If you select the
Extra Hot
function, the operating temperature will be up to 80ºC.
((Dual Spray, Auto, Eco, Care)
⑨
Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the
Delay Start
and
Care
buttons simultaneously for a few seconds.
• On/OFF(FF) is displayed.
⑩
Child Lock
• Used to lock or unlock the control buttons to prevent all the setting from being changed by a child.
• To activate or release the
Child Lock
function, press the
Care
and
Quick
buttons simultaneously for a few seconds
while the dishwasher is in operation.
•
All controls will be disabled except the
Child Lock
and
Power
buttons.
•
Turning off the dishwasher will not reset the
Child Lock
function. You must release the
Child Lock
before you can
operate the dishwasher.
⑪
Power
•
For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
•
In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
⑫
UV
(
※
D1462 only)
•
If you want to sterilize the dishes, press
Dual Spray
and
Auto
button.
•
After drying cycle, sterilizer will be performed by UV lamp.
•
At this time, St code is displayed in display window.
•
When you open the door of dishwasher, UV lamp is turned off.
※
Don’t look at the lamp directly with the naked eye.
