25
ROUBLE SHOOTING GUIDE
T
25
Problem
The display shows "
OE
"
code. (Water is not
pumped away.)
• Straighten hose(s).
• Clean the filter.
• If you can not solve
the problem, call for
service.
• The drain hose is kinked.
• The filter is clogged.
• Motor trouble.
(Washing motor or Drain motor)
The display shows "
IE
"
code.
• Check the water tap.
• If you can not solve
the problem, call for
service.
• Water is not supplied.
• Water tap is not opened.
• Water sensor has a trouble.
The display shows "
EI
"
code.
(Automatically Drain
pump operated.)
• Close the water tap
and unplug the power
plug.
• Call for service.
• Water is leaking from the hose
connections.
• Damage to the unit has been
caused by a water leak.
The display shows "
FE
"
code. (Automatically
Drain pump operated.)
• Excessive water is supplied than
the normal water level.
• There is a problem with the inlet
valve.
The display shows "
HE
"
code.
• The water heater circuit is damaged.
The display shows "
tE
"
code.
The display shows "
LE
"
code.
The display shows "
CE
"
code.
• Thermistor trouble or very high inlet
water temperature.
• Motor trouble.
• Motor trouble.
Solution
Possible Causes