12
UNCTION OF CONTROL BUTTON
F
Program
• When you want to select program, press this button.
UV
• If you want to sterilize the dishes, press
UV
button.
• After drying cycle, sterilizer will be performed by
UV
lamp.
• At this time, “St” code is displayed in display window.
• When you open the door of dishwasher, UV lamp is turned off.
Don’t look at the lamp directly with the naked eye.
Cool Dry
• When you want better drying performance, press this button.
• This process is not part of the program.
• After drying cycle, the fan will operate for a few more minutes to diminish any remaining moisture.
At this time, “Cd” code is displayed in display window.
• If you want, you can open the door and unload the dishes at any time.
Indicator
• Child Lock.
• Refill with special salt.
• Refill with rinse aid.
Time Left
• Before starting, the display window shows the running time of the selected program.
• After starting, the display window shows the remaining time.
• If the dishwasher has a trouble, the trouble type is displayed.
“OE”, “FE”, “IE”, “EI”, “HE”, “CE”, “LE”, “tE”
• If this error letters are displayed, please refer to the trouble shooting guide page 25 and follow the guide.
Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the
Half Load
and
Spray
button simultaneously for a
few seconds.
Rinse
• Repeated pressing of the
Rinse
button will select Extra Hot, Rinse+, Extra Hot & Rinse+.
• If you select the
Extra Hot
function, the operating temperature will be up to 80 . (Dual wash, Auto, Eco)
• When you select
Rinse+
an additional rinse cycle is added.
Half Load
• In case of small load, use upper or lower rack only to save energy.
• With each press, can select
Upper
or
Lower
rack only.
• In case you don’t select this button, the machine always works vario washing, which operate upper and
lower spray arm alternately.
Child Lock
• Used to lock or unlock the control buttons to prevent all the setting from being changed by a child.
• To activate or release the
Child Lock
function, press the
Half Load
and
Rinse
buttons simultaneously for a few
seconds while the dishwasher is in operation.
• All controls will be disabled except the
Child Lock
and
Power
buttons.
• Turning off the dishwasher will not reset the
Child Lock
function. You must release the
Child Lock
before you
can operate the dishwasher.
Power
• For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
• In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
Spray
• With each press, the level of water jet is changed to
Strong
,
Medium
and
Soft
in a sequence.
Delay Start
• If you want to delay the start of selected program, press this button.
• Pressing this button will increase time by 1 hour.
• The delay start time can be adjusted from 1 hour to 19 hours.
