background image

30

TROUBLE SHOOTING GUIDE

Description

The display shows 

PF

 code

This indicates there was a power failure. This function protects 

the dishwasher in the event that the power goes out or the power 

to the unit is disrupted. When power is returned, and a button is 

pushed, this will display for 3 seconds and then go away.

The display shows 

Cd

 code

Cd

 means Cool-dry. This is an additional drying cycle to assist 

drying performance. This cycle runs for a further 60 minutes after 

the course has finished. It can be interrupted at any time by 

opening the door.

The display shows 

CL

 code

CL

 means Child-Lock. This function is used to lock or unlock 

the control buttons to prevent all the settings from being changed 

by a child. It can only be activated during the wash cycle.

The display shows 

F

 code

When the unit is displaying F, the sensor is measuring the 

water clarity. After 5 minutes of sensing (except draining and 

filling), the unit's display will then show the processing time.

The display shows 

numbers between 1 ~ 19

Odor

Buzzing sound. 

(High Temperature Alarm)

This is not an error code, but indicates the setting of the delay 

start. To cancel the function, turn the power off. To change the 

course and option, open the door and select another course and 

option. Countdown will then continue after door is closed again.

If the dishwasher is not used daily, we recommend to run a 

Quick cycle once or twice a day until you have a full load.  

In case odor still persists, run a vinegar rinse through a Auto 

cycle by putting 2cup(500ml) of white vinegar in an upright 

measuring cup in the lower rack, without detergent.

We recommend to maintain according to the USER 

MAINTENANCE INSTRUCTIONS.

This is not an error. When you open the door right after heating 

wash, rinse or dry, buzzing sound would keep on ringing for 

safety if the inside is heated.

These are not error codes indicating a malfunction.

 Before calling for service

Summary of Contents for D1451W





































Reviews: