background image

4

•  Please read this manual carefully 

before using the dishwasher for the 

first time.

•  This manual contains very important notes 

regarding the installation, use and 
maintenance of your dishwasher.

•  The manufacturer can not be responsible 

for problems caused by ignoring these 
safety and caution instructions.

•  This dishwasher is designed for normal 

household use.

•  Do not use the dishwasher for 

industrial and commercial use, or other 

purpose.

•  The appliance is not intended for use 

by young children or infirm persons 

without supervision.

•  Check packaging and dishwasher 

immediately for signs of transport 

damage. If the appliance is damaged, 

do not put it into use but contact your 

supplier without delay.

•  This appliance is intended to be used in 

household and similar applications such 
as;

-  Staff kitchen areas in shops, offices and 

other working environments;

- Farm houses;
-  By clients in hotels, motels and other 

residential type environments;

- Bed and breakfast type environments.

•  If this product is used for commercial 

purpose, it is not warranted. 
(Example: Public places such as 
restaurant, lodging house, training center, 
dormitory) 
If the product is installed outside the 
normal service area, any cost of 
transportation involved in the repair of the 
product, or the replacement of a defective 
part, shall be borne by the owner.

IMPORTANT SAFETY INSTRUCTIONS

 Read all instructions before use

WARNING

To reduce the risk of fire, electric shock, or injury to persons when using the dishwasher, 
follow basic precautions, including the following:  

•  Electrical connection must be in 

accordance with the rating label.

•  Electrical safety is only guaranteed when 

the earth system of your house is in 
accordance with the related local 
regulations. 

(Do not use an extension 

cable or cord.)

•  If the hot water exceeds 65ºC, adjust the 

water heater setting. If the hot water 
temperature can not be maintained below 

65ºC, the dishwasher must be connected 

to cold water.

•  If power supply cord is damaged, it must 

only be replaced by the manufacturer or 
its service agent or a similar qualified 
person in order to avoid a hazard.

•  This appliance must be positioned so that 

the plug is accessible.

•  The appliance is to be connected to the 

water mains using new hose-sets and that 
old hose-sets should not be reused.

 During installation

•  Only suitable household utensils 

should be placed in the dishwasher.

 

(Please avoid utensils; that are non-

heat-resistant, metal decorated, etc.)

 During use

Summary of Contents for D1452LF





































Reviews: