LG D1453AB, Owner'S Manual

① 

Programme

     •  

Press the cycle that corresponds to your desired wash cycle.

② 

Rinse

     •  

Repeated pressing of the 

Spray

 and 

Half Load

 button will select Extra Hot, Rinse+, Extra Hot & Rinse+.

     •  

If you select the 

Extra Hot(

)

 function, the operating temperature will be up to 80

℃

.  

(Eco, Auto, Care, Dual Spray)

     •  When you select 

Rinse+(

)

 an additional rinse cycle is added. 

③ 

Child Lock

 (

)

     •  

Used to lock or unlock the control buttons to prevent all the settings from being changed by a child.

     •  

To activate or release the 

Child Lock

 function, press the 

Child Lock

 button for 3 seconds while the dishwasher is  

in operation.

     •  All controls will be disabled except the 

Child Lock

 and 

Power

 buttons. 

     •   Turning off the dishwasher will not reset the 

Child Lock

 function. You must release the 

Child Lock

 before you can 

operate the dishwasher. 

④ 

Spray

     •  

With each press, the level of water jet is changed to 

Soft (

), Medium(

) 

and

 Strong(

)

 in a sequence. 

(only Care and Dual Spray)

⑤ 

Half load

     •  In case of small load, use upper or lower rack only to save energy.
     •   With each press, select 

Upper(   )

 or 

Lower(   )

 rack only. (Except Quick & Dry)

     •   In case you don’t select this button, the machine always works vario washing, which operates upper and lower spray 

arm alternately.  

⑥ 

Delay Start

     •  

If you want to delay the start of selected programme, press this button.

     •  

Pressing this button will increase time by 1 hour.

     •  

The delay start time can be adjusted from 1 hour to 19 hours.

⑦ 

Power

     •  

For operating, press this button first for power on.

     •  

After operating, this button automatically switches off for safety and energy saving.

     •  

In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.

⑧ 

Indicator

•  

Child Lock.

•  

Refill with rinse aid.

•  

Refill with special salt.

• UV

⑨ 

Time Left

     •  

Before starting, the display window shows the running time of the selected programme.

     •  

After starting, the display window shows the remaining time.

     •  

If the dishwasher has a trouble, the trouble type is displayed. (OE, FE, IE, EI, HE, LE, tE)

    •  

If these error letters are displayed, please refer to the trouble shooting guide page 30 and follow the guide.

⑩ 

Beep On/Off

     •  The dishwasher must be switched on.
     •  The beep on/off function can be set by pressing the 

Spray 

and

 Delay Start

 button simultaneously for a few seconds. 

⑪ 

UV

     •If you want to sterilise the dishes, press 

Half Load

 and 

Delay Start

 button. 

     •After drying cycle, steriliser will be performed by UV lamp.

     •At this time, St code is displayed in display window.

     •When you open the door of dishwasher, UV lamp is turned off.

※ 

Don’t look at the lamp directly with the naked eye.

14

FUNCTION OF CONTROL BUTTON