background image

30

30

Problem

The display shows 

OE

 

code. (Water is not 

pumped away.)

•  The drain hose is kinked.

•  The filter is clogged.

•  Motor trouble.

 

(Washing motor or Drain motor)

The display shows 

IE

 

code.

•  Water is not supplied.

•  Water tap is not opened.

•  Water sensor has trouble.

The display shows 

EI

 

code.

(Automatically Drain 

pump operated.)

•  Straighten hose(s).

•  Clean the filter.

•  If you can not solve the 

problem, call for 

service.

•  Check the water tap.

•  If you can not solve the 

problem, call for 

service.

•  Close the water tap 

and unplug the power 

plug.

•  Call for service.

•  Water is leaking from the hose 

connections.

•  Damage to the unit has been 

caused by a water leak.

The display shows 

FE

 

code. (Automatically 

Drain pump operated.)

•  Excessive water is supplied, which 

is more than the normal water level.

•  There is a problem with the inlet 

valve.

The display shows 

HE

 

code.

•  The water heater circuit is damaged.

The display shows 

tE

 

code.

The display shows 

LE

 

code.

•  Thermistor trouble or very high inlet 

water temperature.

•  Motor trouble.

Solution

Possible Causes

TROUBLE SHOOTING GUIDE

 Before calling for service

Summary of Contents for D1453AB





































Reviews: