background image

 CONTENTS ................................

2

  IMPORTANT SAFETY 

INSTRUCTIONS

Important safety instructions ..............3

Read all instructions before use ........4

Save these instructions ......................5

 INSTALLATION INSTRUCTIONS 

Prepare cupboard opening ................7

Preparation for electrical wiring  ........7

Preparing the dishwasher for 

installation ..........................................8

Installing the dishwasher in  

cupboard ............................................8

Installation of drain hose ....................9

Installation of water inlet hose .........10

Final check and assembling ............10

How to level the dishwasher ............10

 PARTS NAME ..........................

11

  FUNCTION OF CONTROL 

BUTTON ...................................

12

  BEFORE USING FOR THE 

FIRST TIME 

Check and find water hardness 

level .........................................17

Setting up the softening system  

level of your dishwasher ..................17

Salt Filling ........................................18

Adding Rinse Aid .............................18

  INFORMATION FOR ENERGY 

TEST ........................................

19

 HOW TO USE AND OPERATE 

Daily use load ..................................20

Cutlery Rack ....................................21

Cutlery Basket .................................22

Lower Rack ......................................22

Upper Rack ......................................23

Adding Detergent .............................25

Refilling ............................................26

Drying ..............................................27

 OPERATING SEQUENCE ...... 

28

 PROGRAMME .........................

29

   USER  MAINTENANCE 

INSTRUCTIONS

Keeping the dishwasher ..................30

Filters ...............................................30

Lower Spray Arm .............................30

Upper Spray Arm .............................30

Water Inlet........................................30

 TROUBLE SHOOTING GUIDE

Before calling for service .................31

Using SMARTDIAGNOSIS™ ..........34

 SPECIFICATION  .....................

35

CONTENTS

2

Thank you for buying a LG Dishwasher.

Please read your owner’s manual 

carefully, it provides instruction on safe 

installation, use and maintenance.  

Retain it for future reference.

Record the model and serial number of 

your Dishwasher.

Model No.
Serial No.
Date of Purchase

Summary of Contents for D1454 series






































Reviews: