System Setting
23
S
ys
tem Se
tting
3
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
HD AV Sync
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive:
this is called HD AV Sync. Use
WS
(on the remote
control) to scroll up and down through the delay
amount, which you can set at anything between 0
and 300 ms.
Lock (Parental Control)
Initial Setting the Area Code:
When you use this unit for the first time, you have
to set the Area Code.
1. Select the [Lock] menu and then press
D
.
2. Press
D
.
To access the [Lock] options, you must input the
password you have created. Input a password
and press
b
ENTER
. Enter it again and press
b
ENTER
to verify. If you make a mistake before
pressing
b
ENTER
, press
CLEAR
.
3. Select the first character using
WS
buttons.
4. Press
b
ENTER
and select the second character
using
WS
buttons.
5. Press
b
ENTER
to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
D
.
2. Input a password and press
b
ENTER
.
3. Select a rating from 1 to 8 using the
WS
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not
active and the disc plays in full.
4. Press
b
ENTER
to confirm your rating selection.
DH4530T-D0_DPOLLLK_ENG_5962.indd 23
2013-02-13 4:19:40
