Operating
31
Oper
ating
4
Radio Operations
Be sure that FM aerials are connected. (Refer to the
page 19.)
Listening to the radio
1. Press
P
RADIO&INPUT
until FM appears in
the display window.
The last received station is tuned in.
2. Press and hold
TUNING
(-/+)
for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
or
Press
TUNING
(-/+)
repeatedly.
3. Adjust the volume by rotating
VOL.
on the front
panel or by pressing
VOL
(-/+)
on the remote
control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press
P
RADIO&INPUT
until FM appears in
the display window.
2. Select the desired frequency by using
TUNING
(-/+)
.
3. Press
b
ENTER
a preset number will flash in
the display window.
4. Press
PRESET (-/+)
to select the preset number
you want.
5. Press
b
ENTER
.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Deleting all the saved stations
1. Press and hold
CLEAR
for two seconds.
“ERASE ALL” will flash up on the unit display.
2. Press
CLEAR
to erase all saved of the radio
stations.
Deleting a saved station
1. Press
PRESET
(-/+)
to Select a preset number
you want to delete.
2. Press
CLEAR
, the preset number will blink in the
display window.
3. Press
CLEAR
again, to delete the selected preset
number.
Improving poor FM reception
Press
d
PLAY, MONO/STEREO
on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
Seeing information about a
radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about
the radio station being listened to. Press
RDS
repeatedly to cycle through the various data types.
PS
(Programme Service Name)
The name of the channel will appear in the
display.
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News) will
appear in the display.
RT
(Radio Text)
A text message contains special information
from the broadcast station. This text may
scroll across the display.
CT
(Time controlled by the channel)
This shows the time and date as broadcast by
the station.
You can search the radio stations by programme
type by pressing
RDS
. The display will show the last
PTY in use. Press
PTY
one or more times to select
your preferred programme type. Press
AD
. The
tuner will search automatically. When a station is
found the search will stop.
DH4530T-D0_DPOLLLK_ENG_5962.indd 31
2013-02-13 4:19:42
