Operating
37
Oper
ating
4
Radio Operations
Be sure that both FM aerials are connected. (Refer
to the page 25.)
Listening to the radio
1. Press
P
RADIO&INPUT
until FM appears in
the display window.
The last received station is tuned in.
2. Press and hold
TUNING (-/+)
for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
or
Press
TUNING (-/+)
repeatedly.
3. Adjust the volume by pressing
VOL
(+/-) on
the front panel or by pressing
VOL
(+/-)on the
remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press
P
RADIO&INPUT
until FM appears in
the display window.
2. Select the desired frequency by using
TUNING
(-/+)
.
3. Press
b
ENTER
a preset number will flash in
the display window.
4. Press
PRESET (-/+)
to select the preset number
you want.
5. Press
b
ENTER
.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Deleting all the saved stations
1. Press and hold
CLEAR
for two seconds.
“ERASE ALL” will flash up on the unit display.
2. Press
CLEAR
to erase all saved of the radio
stations.
Deleting a saved station
1. Press
PRESET - / +
to Select a preset number
you want to delete.
2. Press
CLEAR
, the preset number will blink in the
display window.
3. Press
CLEAR
again, to delete the selectd preset
number.
Improving poor FM reception
Press
d
PLAY, MONO/STEREO
on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
DH6520TK-F2_DRUSLLK_ENG_4602.indd 37
2012-02-16 �� 3:10:58
