Connecting
20
C
onnecting
2
LOCK (Parental Control)
Initial Setting of the Area Code
When you use this unit for the first time, you have
to set the Area Code as shown below.
1. Press
SETUP
on the remote control.
2. Select the [Lock] menu and then press
d
.
3. Press
d
. To access the [Lock] options, you must
input the password you have created. Input a
password and press
ENTER
b
. Enter it again
and press
ENTER
b
to verify. If you make a
mistake before pressing
ENTER
b
, press
CLEAR
.
4. Select the first character by using
w/s
buttons.
5. Press
d
and select the second character by
using
w/s
buttons.
6. Press
ENTER
b
to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
d
.
2. Input a password and press
ENTER
b
.
3. Select a rating from 1 to 8 by using the
w/s
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not active
and the disc plays in full.
4. Press
ENTER
b
to confirm your rating
selection.
Password
You can enter or change password.
1. Select [Password] on the [Lock] menu and then
press
d
.
2.
Input a password and press
ENTER
b
.
To change the password, press
ENTER
b
when
the [Change] option is highlighted. Input a
password and press
ENTER
b
. Enter it again
and press
ENTER
b
to verify.
3. Press
SETUP
to exit the menu.
If you forget your password, you can clear it by
using the following steps:
1. Press
SETUP
to display the Setup menu.
2. Input the 6-digit number “210499” and press
ENTER
b
. The password is cleared.
,
Note
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 33.
1. Select [Area Code] on the [Lock] menu then
press
d
.
2. Input a password and press
ENTER
b
.
3. Select the first character by using
w/s
buttons.
4. Press
d
and select the second character by
using
w/s
buttons.
5. Press
ENTER
b
to confirm your Area code
selection.
DM5520-FU.AGHALLK_1701-ENG.indd 20
2012-06-21 3:13:53
