8
Power connections
Connecting the AC Adaptor
Connect the supplied AC Adaptor from the unit to a power socket.
AC adaptor
• This AC adaptor operates on 100 - 240 V - 1.0 A 50 / 60 Hz.
• Contact an electrical parts distributor for assistance in selecting a suitable
AC plug adaptor or AC cord set.
• Manufactured by I-MAG ELECTRONICS(DONG GUAN) CO., LTD.
Connecting the Automotive adaptor
This unit and its automotive adaptor are designed for use in vehicles that have
8.5 - 15 volt, negative ground electrical systems. This is standard for most
vehicles. If your vehicle has a different type of electrical system, the DC power
system cannot be used.
Automotive adaptor
• This automotive adaptor operates on DC 8.5 - 15 V.
• Contact an electrical parts distributor for assistance in selecting a suitable
automotive adaptor.
• Manufactured by GRAND POWER ELECTRONIC TECHNOLOGY
(SHENZHEN) CO., LTD.
Caution
• To prevent electrical shock and possible damage to your unit or vehicle,
always unplug the automotive adaptor from the power supply socket in the
car before you remove the plug from your unit.
• A 3 amp. 250 V fuse for protection is installed in the automotive adaptor.
• While the engine is being started, disconnect the automotive adaptor from
the car’s cigarette lighter socket.
• Do not operate your unit when the car battery is discharged.
Peak current from the car generator may cause the DC fuse to be blown.
• If the vehicle’s supply voltage drops below approximately 10 volts, your unit
may not work properly.
• Do not leave your unit in the place where the temperature exceeds 45 °C
(113 °F), or the pick-up device may be damaged.
Examples
include:
- Inside a car with the windows closed and in direct sunshine.
- Nearby a heating appliance.
* The actual set may differ from the drawing.
Plug in a power source.
Plug in the “DC 12 V IN”
Plug in the power supply
socket in the car.
DP582B-P.ATHALLK_7821_ENG.indd 8
DP582B-P.ATHALLK_7821_ENG.indd 8
10. 10. 20
3:38
10. 10. 20
3:38
