background image

E-10

Device Drivers

When using Windows 98/95 or Window NT Workstation Ver. 4.0, the installation of soft-
ware driver or special device is not required.

This DVD-ROM drive is supplied with MS-DOS drivers on a 3

1

/

2

-inch floppy disk. These drivers

are required to use the DVD-ROM drive in DOS and Windows 3.1.

Drivers for other Operating Systems are not normally required or available as they usually
have an generic IDE, E-IDE/ATAPI DVD-ROM driver built in; Windows 95, 98, NT 3.51 and
higher and OS/2 Warp 3.0 are such examples.

If it is necessary to edit any file manually, first make a backup copy on a floppy disk, then edit
the original file, save it to your hard drive, exit, and re-boot the PC to ensure the change will
be implemented.

Running the Install Program (MS-DOS Installation)

1. Boot to the DOS prompt.
2. Insert the driver diskette into the appropriate drive.
3. Go to the floppy drive by typing A: or B: at the DOS prompt., as appropriate.
4. Type the word INSTALL and press [Enter]
5. The Install program will begin loading and you will be prompted to accept the default

directory of C:\DVDROM press [Enter] to accept (suggested) or edit the path then
press [Enter]

6. When installation is complete, remove the diskette and reboot your PC.

(Note : You must have a Config.sys and an Autoexec.bat file on your hard drive for the install
program to add the necessary command lines.)

For Windows 98/95 Users

In order to ensure normal drive operation, please check the following:

The drive is displayed in
[control panels]-[system]-[device manager]-[CD-ROM]

32-bit is displayed in
[control panels]-[system]-[performance]

If the drive is not recognized by your computer, please check the following items.

If a       indicator is displayed on the IDE controller in [control panels]-[system]-[device
manager]-[harddisk controller], you will need to contact your PC’s 
manufacturer or the motherboard’s manufacturer and get the appropriate IDE 
controller driver.

Run ADD NEW HARDWARE in Control Panel to let PC search again for new device.

Summary of Contents for DRD-8120B

















Reviews: