E-7
Front View
1.
Headphone Jack
Standard
1
/
8
” (3.5mm) stereo jack for listening to the audio signal from audio CDs.
2.
Headphone Volume Control
Adjusts the headphone sound level.
3.
Disc Drawer
Accepts a CD-ROM/DVD-ROM disc on its tray.
4.
Busy Indicator
The Busy Indicator lights during initialization and data-read operations.
5.
Emergency Eject Hole
Insert a paper clip here to eject the drawer manually or when there is no power.
6.
Open/Close/Stop Button
This button is pressed to open or close the CD tray.
If an audio CD is playing, pressing this button will stop it, and pressing it again will open
the tray.
Back View
1.
Digital Audio Output Connector
This is a digital audio output or Video CD output connector.
You can connect this to a digital audio system or a Video CD Board.
2.
Analog Audio Output Connector
The Audio Output Connector connects to a sound card.
3.
Master/Slave/CSEL Jumper
These three jumpers are used to set the DVD-ROM Drive to either a Master, Slave, or
CSEL device.
4.
Interface Connector
This 40-pin connector is used to transfer data and control signals between the DVD-ROM
Drive and your PC.
5.
Power-in Connector
Attach a power cable from the computer to this connector.
