32
MAINTENANCE
MAINTENANCE
WARNING
• Remove the power plug when you clean the appliance. Not removing the plug may result in electric
shock.
Cleaning after Every Dry
Cleaning the Lint Filter
CAUTION
• Clean the lint filter in the proper way by referring
to the following instructions. Failure to do so can
cause lint build up on the condenser that can
affect the drying performance.
NOTE
• Cleaning the lint filter will reduce drying time,
energy consumption and prevent unnecessary
malfunctions.
• Unload all of the clothes from the appliance
before pulling out the lint filter.
• After cleaning the 2 piece lint filter, insert it back
into place. If the lint filter is not in the appliance,
you can not operate the appliance.
a
Inner Filter
• Always clean the inner filter before and after
use.
b
Outer Filter
• Clean the outer filter after drying 10 times or
when the lint has accumulated onto the outer
filter.
Clean the inner filter
1
Pull out the inner filter from the outer filter and
then open the inner filter.
• Open the filter by unfolding it in the
direction of the arrow.
2
Clean a large cluster of lint first, then clean the
residual lint using vacuum cleaner or washing
under running water.
• Dry the filter completely if the filter is moist.
Failure to do so, odour may occur in the
appliance.
• DO NOT tap the filter repeatedly as the built
in magnet may dislodge and cause a
malfunction.
3
After drying the inner filter completely, close
the filter by pushing down its center.
• Ensure the left and right side of the inner
filter is closed properly.
4
Insert the inner filter into the outer filter.