3
System Setting
System Setting
12
S
ys
tem Se
tting
3
Setup
When the unit is turned-on at the first time, you
have to select the desired language. (optional)
Adjust the settings
You can change the settings of the player in the
[SETUP] menu.
1.
Press SETUP.
2.
Select the first setup option using
ws
and
press
d
to move to the second level.
3.
Select a second setup option using
ws
and
press
d
to move to the third level.
4.
Select a desired setting using
ws
and press
ENTER to confirm.
5.
Press SETUP to escape from setup menu.
[LANGUAGE] Menu
Menu Language/Disc Audio/Disc
Subtitle/Disc Menu
Select and set the language you prefer.
[DISPLAY] Menu
TV Aspect
Select and set TV aspect ratio according to your TV
type and preference.
[4:3]:
Standard TV type
[16:9]:
Wide TV type
Display Mode
Select and set Display Mode according to your
preference. Display Mode works only when the TV
Aspect mode is 4:3.
[Panscan]:
Display full screen with cut non-
main scene on TV
[Letterbox]:
Display wide screen with black
stripe at top and bottom on TV
Progressive Scan
Check whether your TV can accept the progressive
signal. If your TV accepts it, you can enjoy accurate
color with high quality by selecting [On].
If there is any error after setting to Progress Scan,
you have to initialize the unit by pressing and
holding STOP for five seconds.
TV Output Select
Select an option according to the TV connection
type.
[RGB]:
When your TV is connected with the
SCART jack.
[YPbPr]:
When your TV is connected with the
Component Video Out jacks on the unit.
[AUDIO] Menu
Set the player’s Audio options according to various
disc output type you use.
Dolby Digital / DTS / MPEG
Select the type of digital audio signal to use the
DIGITAL AUDIO OUT jack.
[Bitstream]:
Select to connect DIGITAL AUDIO
OUT jack to an amplifier with Dolby Digital, DTS
or MPEG decoder.
[PCM] (for Dolby Digital / MPEG):
Select
to connect DIGITAL AUDIO OUT jack to an
amplifier without Dolby Digital or MPEG
decoder.
[Off] (for DTS):
Select to connect DIGITAL
AUDIO OUT jack to an amplifier without DTS
decoder.
Sample Freq. (Frequency)
Selects the sampling frequency of the audio signal
between [48KHz] and [96KHz].
Downloaded From DvDPlayer-Manual.com LG Manuals
