background image

3

1  Safety

1.1  Symbols

Caution, risk of electric shock

'RQRWSODFHRULQVWDOOQHDUÀDPPDEOHRUH[SORVLYHPDWHULDOV

Install the product out of reach of children

Read the instruction manual, in its entirety, before starting installation 
and operation

Heavy weight may cause serious back injuries

Do not dispose of the product with household waste

Recyclable

Disconnect the equipment before carrying out maintenance or repair

Observe precautions for handling electrostatic-sensitive devices

Protective Class 1

Caution, risk of electric shock, energy storage timed discharge.

1.2  Safety Instructions

For safety reasons, installers are responsible for familiarizing themselves with the contents of 
this document and all warnings before performing installation and servicing.

1.2.1  General Safety Precautions

Over-voltages or wrong wiring can damage the battery pack and cause combustion which can 
be extremely dangerous.

$Q\W\SHRISURGXFWEUHDNGRZQPD\OHDGWRDOHDNDJHRIHOHFWURO\WHVRUÀDPPDEOHJDV
$YRLGLQVWDOOLQJWKHEDWWHU\SDFNZKHUHÀDPPDEOHPDWHULDOVDUHVWRUHG'RQRWLQVWDOOLQSODFHV

where explosive gas or chemicals are present.
During installation of the battery, the utility grid and solar input must be disconnected from the 

%DWWHU\3DFNZLULQJ:LULQJPXVWEHFDUULHGRXWE\TXDOL¿HGSHUVRQQHO
%DWWHU\SDFNVKRXOGRQO\EHVHUYLFHGE\TXDOL¿HGSHUVRQQHO

The electronics inside the battery pack are vulnerable to electrostatic discharge.
Be sure to be grounded before handling the battery pack.
Read the label with Warning Symbols and Precautions, which are visible under the Battery 
Cover (see Section 

1.3 Warning Label

).

1.2.2  Battery Handling Guide

‡ 'RQRWH[SRVHWKHEDWWHU\WRDQRSHQÀDPH

‡ 'RQRWSODFHWKHSURGXFWQHDUWRKLJKO\ÀDPPDEOHPDWHULDOV

‡

Do not expose or place near water sources such as downspouts or sprinklers.

‡

Do not store or install the product in direct sunlight.

‡

Do not install the product in an airtight enclosure or in an area without ventilation.

‡

Do not install the product in living area of dwelling units or in sleeping units other 
than within utility closets and storage or utility spaces.

‡

Store in a cool and dry place. (Do not store in greenhouses or storage areas for 

KD\VWUDZFKD൵DQLPDOIHHGIHUWLOL]HUYHJHWDEOHVRUIUXLWSURGXFWV

‡ 6WRUHWKHSURGXFWRQDÀDWOHYHOVXUIDFH

‡

Store the product out of reach of children and animals.

‡

Store the product in clean environment, free of dust, dirt and debris.

‡ 'RQRWGLVFRQQHFWGLVDVVHPEOHRUUHSDLUWKHSURGXFWXQTXDOL¿HGSHUVRQQHO2QO\

TXDOL¿HGSHUVRQDODUHWRKDQGOHLQVWDOODQGVHUYLFHWKH3URGXFW

‡

Do not damage the Product by dropping, deforming, impacting, cutting or 

SHQHWUDWLQJZLWKDVKDUSREMHFW'RLQJVRPD\FDXVHD¿UHRUOHDNDJHRI

electrolytes.

‡

Do not touch the product if liquid spills on it. There is a risk of electric shock. 
Handle the battery wearing insulated gloves.

‡ 'RQRWVWHSRQWKHSURGXFWRUWKHSURGXFWཚVSDFNDJLQJVLQFHWKHSURGXFWPD\EH

damaged.

‡ 'RQRWSODFHDQ\IRUHLJQREMHFWVRQWRSRIWKH%DWWHU\3DFNDQGRQWKHFRROLQJ¿Q

‡

Do not put the battery pack upside down on the ground.

‡

Do not connect the power cables at terminal the block in the opposite direction.

‡

Do not charge or discharge a damaged battery.

‡

If the Product is installed in a garage or carport, ensure there is adequate clearance 
from vehicles.

‡ 7KHEDWWHU\SDFNKDVEHHQFHUWL¿HG,3DQGFDQEHLQVWDOOHGLQGRRUVDVZHOO

as outdoors. However, if installed outdoors, do not allow the battery pack to be 
exposed to direct sunlight or water sources, as they may cause:

-  Power limitation phenomena in the battery (with a resulting decrease in energy 

production by the system).

-  Premature wear of the electrical/electromechanical and mechanical components.
-  Reduction in performance, performance warranty and possible damage of the battery

‡

Only use the product with a LGES-authorized inverter.
For a list of compatible inverters, visit the LG ESS Battery Website by the URL 
below and check the ‘Home Battery’ > ‘Product Info’ menu.

https://www.lgessbattery.com/us (in case of North America) 
https://www.lgessbattery.com/au (in case of Australia) 
https://www.lgessbattery.com/eu (in case of all EU-countries in general)
https://www.lgessbattery.com/de (in case of Germany)
https://www.lgessbattery.com/it (in case of Italy)
https://www.lgessbattery.com/es (in case of Spain)

‡

Do not connect any AC conductors or photovoltaic conductors directly to the 
battery pack. These are only to be connected to the inverter.

1.2.3  Response to Emergency Situations

The Product includes internal fault mechanisms designed to prevent failures and subsequent 
risk hazards. However, LG Energy Solution cannot guarantee safety performance of the 
Product is ever exposed to abuse, damage or negligence.

‡

If a user happens to be exposed to the internal materials of the battery cell due to 
damage on the outer casing, the following actions are recommended. 

In case of inhalation: Leave the contaminated area immediately and seek medical 
attention.

In case of contact with eyes: Rinse eyes with running water for 15 minutes and 
seek medical attention.

In case of contact with skin: Wash the contacted area with soap thoroughly and 
seek medical attention.

In case of ingestion: Induce vomiting and seek medical attention.

,ID¿UHEUHDNVRXWDWWKHORFDWLRQZKHUHWKHEDWWHU\SDFNLVLQVWDOOHGSHUIRUPWKHIROORZLQJ

countermeasures.

‡

8WLOL]H¿UHH[WLQJXLVKLQJPHGLD

A respirator is not required during normal operation.

8VHDQ)0RU&2H[WLQJXLVKHUIRUEDWWHU\¿UHV
8VHDQ$%&¿UHH[WLQJXLVKHULIWKH¿UHLVQRWIURPWKHEDWWHU\DQGKDVQRW\HWVSUHDGWRLW

‡

)ROORZSURSHU¿UH¿JKWLQJLQVWUXFWLRQV

1. 

,ID¿UHRFFXUVZKHQFKDUJLQJEDWWHULHVSURYLGHGLWLVVDIHWRGRVRGLVFRQQHFW
WKHEDWWHU\SDFNFLUFXLWEUHDNHUWRVKXWR൵WKHSRZHUFKDUJH

2. 

,IWKHEDWWHU\SDFNLVQRWRQ¿UH\HWH[WLQJXLVKWKH¿UHEHIRUHWKHEDWWHU\SDFN
FDWFKHV¿UHSUHIHUDEO\ZLWKZDWHU

3. 

,IWKHEDWWHU\SDFNLVRQ¿UHGRQRWWU\WRH[WLQJXLVKLWDQGHYDFXDWHSHRSOH

from the premises immediately.

WARNING

There may be a possible explosion when batteries are heated above 150°C. When a 
battery pack is burning, it will leak poisonous gases. Do not approach it.

‡

(൵HFWLYHZD\VWRGHDOZLWKDFFLGHQWV

2QODQG3ODFHWKHGDPDJHGEDWWHU\LQWRDVHJUHJDWHGSODFHDQGFDOO\RXUORFDO¿UH

department or service engineer. 

In water:  Stay out of the water and do not touch anything if any part of the battery, inverter, 

or wiring is submerged. 

Do not use the submerged battery again. Contact your service engineer for assistance.

Summary of Contents for EH153064P8S1





























Reviews: