5-10
PRINCIPLE OF MAIN SYSTEM
ITEM
Disassembling procedures
Door system
Dismantling the oven door
The oven door is fitted with four glass panels, mounted one behind the other. The
inner glass panels can be removed for cleaning.
Note :
The following steps must be performed only after the oven door has been
removed. Then place the door on a soft and even surface with the handle
facing down to protect it from breakage and to prevent it getting scratched.
Step. 1
Remove the two screws at the
right and left-hand side of the door
and pull the top cover above the
glass panels forward.
Step. 2
Lift the innermost pane up and out from the door carefully. Then remove the
insulator.
Door top cover
insulator
LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes