6-2
GENERAL TROUBLE SHOOTING
LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Symptoms
Possible Cause & faults
Solutions
Bottom heat does not
perform.
Cooling fan motor does not
work.
Convection fan does not
rotate.
Convection fan make a
noise.
Lamp dose not turned on.
Clock is not set
(The oven cannot be used until the time
of day is set)
Connection of the function switch
may be defective.
The relay (RY1) on the PCB or the
bottom heater may be defective.
Connection of the cooling motor
may be defective.
Connection of the function switch may
be defective.
Cooling fan motor may be defective
Connection of the convection motor may
be defective.
Connection of the function switch
may be defective.
Convection motor may be defective
The nut of convection fan may be
loosened.
The convection fan may be deformed.
Connection of the lamp or function
switch may be defective.
Lamp may be burned out.
Set the clock
Check all connections of function
switch with connecting label on the
controller assembly.
Check the connection of relay or
bottom heater. If not any defection,
replace bottom heater or the PCB.
Check the connection of convection
motor.
Check all connections of function
switch with connecting label on the
controller assembly.
replace the cooling fan motor.
Check the connection of convection
motor.
Check all connections of function
switch with connecting label on the
controller assembly.
replace the convection motor.
Re-fasten the nut.
Replace the convection fan.
Check the wiring.
Replace the lamp.