background image

39

EN

Symptoms

Reason

Solution

Door does not open

Once washing machine has 

started, the door cannot be 

opened for safety reasons.

 

Check if the ‘Door Lock’ icon is 

illuminated. You can safely open the 

door after the ‘Door Lock’ icon turns off.

Wash cycle time 

delayed

If an imbalance is detected or if 

the suds removing programme 

is on, the wash time will 

increase.

 

This is normal. The time remaining 

shown in the display is only an 

estimate. Actual time may vary.

Fabric softener 

overflow

Too much softener may cause 

an overflow.

 

Follow softener guidelines to ensure 

appropriate amount is used. Do not 

exceed the maximum fill line.

Softeners 

dispensed too early

Too much softener may cause 

an premature dispensing.

 

Follow the guidelines provided by the 

detergent manufacturer.

 

Close the dispenser drawer slowly. Do 

not open the drawer during the wash 

cycle.

Dry problem

Check water supply tap.

 

Do not overload. Check that the 

washing machine is draining properly to 

extract adequate water from the load. 

Clothes load is too small to tumble 

properly. Add a few towels.

 

Turn off water supply tap.

Summary of Contents for F2J5QN Series

















































Reviews: